Melting and pumping efficiency
The temperature is distributed evenly over the entire contact surface of the tank, enabling thorough and efficient melting of the adhesive.
Pumping is characterized by great regularity thanks to a well thought-out design of the tank/pump/pneumatic unit assembly.
Use and maintenance efficiency
The melter’s easy, user-friendly control panel facilitates the day-to-day work of the operator. The large tank lid opens fully to enable charging and cleaning the tank.
In just a few steps full access is provided to the interior of the melter.
Operator security
Micron’s safety features keep the casing cool and its valve depressurizes the adhesive pressure system in case of alarm or if the melter switches off.
Energy efficiency
The Micron series maximizes energy consumption per kilogram of molten adhesive, resulting in significant cost and maintenance savings.
WHERE TECH MEETS MAGIC GAME-CHANGING BENEFITS.
Total accessibility
Cool touch
Ease of use and installation
Energy efficiency
Boost your productivity thanks to its versatility
Specifications that change everything
Meet the melter that changes your production processes to make them more efficient and faster.
Micron 5
- TANK VOLUME
5,15 liters - MAXIMUM PERMISSIBLE BLOCK VOLUME
- LEVEL A 192 mm
- LEVEL B 182 mm
- LEVEL C 106 mm
- MAXIMUM MELTING CAPACITY
9 kg/h (*) - PUMPING RATE
- 29,3 kg/h pump 7 cc (*)
- 66,0 kg/h pump 19 cc (*)
- NUMBER OF OUTPUTS
- 2, 4 or 6 with one pump
- 2 ó 4 with two pumps
- TEMPERATURE RANGE
40 a 200°C (104 a 392°F) optional: 40 a 230°C (104 a 446°F) - TEMPERATURE CONTROL
RTD ± 0,5°C (± 1°F) - MAXIMUM WORKING PRESSURE (A 6 BAR)
81,6 bar (1.183 psi) - MAXIMUM INSTALLED POWER (A 230 VAC)
- 4.700 W (2 outputs)
- 7.100 W (4 outputs)
- 9.500 W (6 outputs)
- EXTERNAL FUNCTIONS
- Temperature output OK
- Low level output
- Input under maintenance
- Output inhibition external control
- ELECTRICAL REQUIREMENTS
1 ~ N/PE 230V 50/60 Hz ó 3 ~ N/PE 400/230V 50/60 Hz 3 ~ PE 230V 50/60 Hz with power adapter ó 3 ~ PE 400V 50/60 Hz with transformer base - DIMENSIONS (L X A X H)
- 587 x 341 x 481
- 587 x 341 x 628 (open lid)
- WEIGHT
37,5 kg (without charge) - OPTIONS
- Temperature range from 40 to 230°C (104 to 446°F)
- VP-200 automatic pressure control
- Transformer base for 400 VAC without neutral (not available for micron 35)
- Air input filter
- Low-level sensor with or without warning
- Granulate feeder
*Depending on the type of adhesive.
Micron 10
- HOLDING CAPACITY
9,7 liters - MAXIMUM PERMITTED BLOCK VOLUME
- LEVEL A 192 mm
- LEVEL B 267 mm
- LEVEL C 140 mm
- MAXIMUM MELTING CAPACITY
13,5 kg/h (*) - PUMPING RATE
- 29,3 kg/h pump 7 cc (*)
- 66,0 kg/h pump 19 cc (*)
- NUMBER OF OUTPUTS
- 2, 4 or 6 with one pump
- 2 ó 4 with two pumps
- TEMPERATURE RANGE
40 a 200°C (104 a 392°F) optional: 40 a 230°C (104 a 446°F) - CONTROL TEMPERATURE
RTD ± 0,5°C (± 1°F) - MAXIMUM WORKING PRESSURE (6 BAR)
81,6 bar (1.183 psi) - MAXIMUM INSTALLED POWER (A 230 VAC)
- 5.700 W (2 outputs)
- 8.100 W (4 outputs)
- 10.500 W (6 outputs)
- EXTERNAL FUNCTIONS
- Temperature output OK
- Low level output
- Input under maintenance
- Output inhibition external control
- ELECTRICAL REQUIREMENTS
1 ~ N/PE 230V 50/60 Hz ó 3 ~ N/PE 400/230V 50/60 Hz 3 ~ PE 230V 50/60 Hz with power adapter or 3 ~ PE 400V 50/60 Hz with transformer base - DIMENSIONS (L X A X H)
- 671 x 341 x 481
- 671 x 341 x 760 (open lid)
- WEIGHT
45,7 kg (without charge) - OPTIONS
- Temperature range from 40 to 230°C (104 to 446°F)
- VP-200 automatic pressure control
- Transformer base for 400 VAC without neutral (not available for micron 35)
- Air input filter
- Low level sensor with or without warning light,
- Granulate feeder
*Depending on the type of adhesive
Micron 20
- HOLDING CAPACITY
19,7 liters - MAXIMUM PERMITTED BLOCK VOLUME
- LEVEL A 263 mm
- LEVEL B 273 mm
- LEVEL C 234 mm
- MAXIMUM MELTING CAPACITY
19 kg/h (*) - PUMPING RATE
- 29,3 kg/h pump 7 cc (*)
- 66,0 kg/h pump 19 cc (*)
- NUMBER OF OUTPUTS
- 2, 4 or 6 with one pump
- 2 or 4 with two pumps
- TEMPERATURE RANGE
40 a 200°C (104 a 392°F) opcional: 40 a 230°C (104 a 446°F) - TEMPERATURE CONTROL
RTD ± 0,5°C (± 1°F) - MAXIMIUM WORKING PRESSURE (6 BAR)
81,6 bar (1.183 psi) - MAXIMIUM INSTALLED POWER (230 VAC)
- 6.200 W (2 outputs)
- 8.600 W (4 outputs)
- 11.000 W (6 outputs)
- FUNCIONES EXTERNAS
- Temperature control OK
- Low level output
- Input under maintenance
- Output inhibition external control.
- ELECTRIAL REQUIREMENTS
1 ~ N/PE 230V 50/60 Hz ó 3 ~ N/PE 400/230V 50/60 Hz 3 ~ PE 230V 50/60 Hz with power adapter or 3 ~ PE 400V 50/60 Hz with transformer base - DIMENSIONS (L X A X H)
- 671 x 382 x 524
- 671 x 382 x 875 (open lid)
- WEIGHT
60,2 kg (without charge) - OPTIONS
- TEMPERATURE RANGE FORM 40 to 230°C (104 to 446°F)
- VP-200 AUTOMATIC PRESSURE CONTROL
- TRANSFORMER BASE FOR 400 VAC WITHOUT NEUTRAL (NOT AVAILABLE FOR MICRON 35)
- AIR INPUT FILTER/li>
- LOW-LEVEL SENSOR WITH OT
- AUTOMATIC FEEDER
*Depending on the type of adhesive
Micron 35
- HOLDIN CAPACITY
37,4 lilters - MAXIMUM PERMITTED BLOCK VOLUME
- LEVEL A 299 mm
- LEVEL B 299 mm
- LEVEL C 342 mm
- MAXIMUM MELTING CAPACITY
30 kg/h (*) - PUMPING RATE
- 29,3 kg/h pump 7 cc (*)
- 66,0 kg/h pump 19 cc (*)
- NUMBER OF OUTPUTS
- 2, 4 or 6 with one pump
- 2 ó 4 with two pumps
- TEMPERATURE RANGE
40 a 200°C (104 a 392°F) optional: 40 a 230°C (104 a 446°F) - TEMPERATURE CONTROL
RTD ± 0,5°C (± 1°F) - MAXIMUM WORKING PRESSURE (6 BAR)
81,6 bar (1.183 psi) - MAXIMUM INSTALLED POWER (230 VAC)
- 7.700 W (2 outputs)
- 10.100 W (4 outputs)
- 12.500 W (6 outputs)
- EXTERNAL FUNCTIONS
- Temperature output OK
- Low level output
- Input under maintenance
- Output inhibition external control
- ELECTRICAL REQUIREMENTS
1 ~ N/PE 230V 50/60 Hz ó 3 ~ N/PE 400/230V 50/60 Hz 3 ~ PE 230V 50/60 Hz with power adapter or 3 ~ PE 400V 50/60 Hz with transformer base - DIMENSIONS (L X A X H)
- 738 x 435 x 673
- 738 x 435 x 1067 (open lid)
- WEIGHT
90,1 kg (without charging) - OPTIONS
- Temperature range from 40 to 230°C (104 to 446°F)
- VP-200 automatic pressure control
- Air input filter
- Low-level sensor with or without warning light
- Granulate feeder
*Depending on the type of adhesive
Features
- Versatility
- Usability
- Melting capacity
- Adhesive treatment
- Energy efficiency
- Accessibility
Accessories
We put Meler’s know-how at the service of your project regardless of the sector it comes from. Therefore, in our range of products you can also find accessories to increase the productive capacity of your business.
Industrias
Hot melt systems for graphic arts
Application of high-speed adhesives in bookbinding and paper converting
